|
 |
Wire Rope Pulling Slings
|
| Design Features |
BorePro's Pulling Slings allow multiple pulls of cable, pipe or duct at one time by using staggered attachment. The staggered arrangement insures that individual connections do not interfere with each other.
These high quality pulling slings are manufactured from extra flexible, 7x19, galvanized aircraft cable for strength and durability. Individual Legs are replaceable. Working Leg Loads and Total Work Loads are based on equal horizontal loads on all
cables and a safety factor of 3:1.
Since BorePro manufactures all slings in house, other sling configurations are readily available upon request.
|
| Standard Pulling Slings* |
| Model No. |
Cable Dia. |
No. of Legs |
Working Load/Leg |
Total Work Load** |
| WRS-202 |
1/4" |
2 |
2,300 lbs. |
4,000 lbs. |
| WRS-203 |
1/4" |
3 |
2,300 lbs. |
6,500 lbs. |
| WRS-204 |
1/4" |
4 |
2,300 lbs. |
6,500 lbs |
| WRS-205 |
1/4" |
5 |
2,300 lbs. |
6,500 lbs |
| WRS-206 |
1/4" |
6 |
2,300 lbs. |
6,500 lbs |
| WRS-302 |
3/8" |
2 |
4,800 lbs. |
9,500 lbs. |
| WRS-303 |
3/8" |
3 |
4,800 lbs. |
9,500 lbs. |
| WRS-304 |
3/8" |
4 |
4,800 lbs. |
13,000 lbs. |
| WRS-305 |
3/8" |
5 |
4,800 lbs. |
13,000 lbs. |
| WRS-306 |
3/8" |
6 |
4,800 lbs. |
13,000 lbs. |
| WRS-402 |
1/2" |
2 |
7,000 lbs. |
13,000 lbs. |
| WRS-403 |
1/2" |
3 |
7,000 lbs. |
13,000 lbs. |
| WRS-404 |
1/2" |
4 |
7,000 lbs. |
17,000 lbs. |
| WRS-405 |
1/2" |
5 |
7,000 lbs. |
17,000 lbs. |
| WRS-406 |
1/2" |
6 |
7,000 lbs. |
17,000 lbs. |
* Not for overhead lifting.
** Based on the Shackle's rating. |
| replacement pulling sling shackles |
| Model No. |
Description |
Working Load |
| DS-500 |
Single Shackle - 1/2" |
4,000 lbs. |
| DS-625 |
Single Shackle - 5/8 " |
6,500 lbs. |
| DS-750 |
Single Shackle - 3/4 " |
9,500 lbs. |
| DS-875 |
Single Shackle - 7/8 " |
13,000 lbs. |
| DS-100 |
Single Shackle - 1.0 " |
17,000 lbs. |
|
Swivel Eye Grips |
Constructed with a solid steel rotating eye and high grade galvanized cable, BorePro's Swivel Eye Grips provide contractors with a strong, long wearing grip that is easy to load and unload. These grips are engineered for pulling underground pipe, duct and
primary and secondary cables.
The rotating eye is not a ball bearing type swivel and will not turn under pulling tension. It will only turn to releive pulling rorque when the pulling tension is released. If a constant swivel action is needed during a pull, use a properly sized ball bearing swivel ahead of the grip.
|
|
| swivel eye mesh grips |
| model no. |
weave |
grip range |
mesh length |
working load |
tensile strength |
| S 75-99 |
Double |
.75" - .99" |
20" |
2,200 lbs. |
6,800 lbs |
| S 100-124 |
Double |
1.00" - 1.24" |
20" |
4,400 lbs. |
12,800 lbs. |
| S 125-149 |
Double |
1.25" - 1.49" |
24" |
4,400 lbs. |
12,800 lbs. |
| S 150-199 |
Double |
1.50" - 1.99" |
25" |
5,500 lbs. |
16,400 lbs. |
| S 200-249 |
Double |
2.00" - 2.49" |
26" |
9,000 lbs. |
27,200 lbs. |
| S 250-299 |
Double |
2.50" - 2.99" |
28" |
11,000 lbs |
33,000 lbs. |
| S 300-349 |
Double |
3.00" - 3.49" |
30" |
13,600 lbs. |
41,000 lbs. |
| S 350-399 |
Double |
3.50" - 3.99" |
32" |
16,000 lbs. |
48,000 lbs. |
| S 400-449 |
Double |
4.00" - 4.49" |
33" |
16,000 lbs. |
48,000 lbs. |
|
Pulling Grips |
Pulling grips are fabricated of Hi-Fatigue Aircraft Strand plastic coated steel cable. Continuous fabrication of grip from receiving end through entire mesh, including eye, provides a flexible stress relieving pulling eye. All strands are plastic coated, which increases the life of the grip, provides a bearing surface on underground pulls, and increases the ease and safety of installation and removal for workmen.
|
|
| Model No. |
Nominal Grip Range* |
Weave |
Working Load |
| A20-SW |
3/4" - 1 1/4" |
Single |
1,000 lbs. |
| A20 |
3/4" - 1 1/4" |
Double |
2,000 lbs. |
| B24 |
1 1/4" - 2" |
Triple |
2,500 lbs. |
| C26 |
2" - 2 3/4" |
Triple |
3,500 lbs. |
| D38 |
2 3/4" - 3 1/2" |
Triple |
4,500 lbs. |
| E46 |
3 1/2" - 4 1/4" |
Triple |
5,500 lbs. |
| F52 |
4 1/4" - 4 7/8" |
Triple |
6,000 lbs. |
* Without Maxi-Grip nose cone.
Note: When used without a Losst Motion device and trailing bullet, the service life is significantly reduced. |
|
| Attachment Hardware |
Load Rated Screw Pin Anchor Shackles
|
Quick-Links
|
| Load rated screw pin anchor shackels |
| Model No. |
Body Size |
Pin Size |
Working load |
| AS-312 |
5/16" |
3/8" |
1,500 lbs. |
| AS-375 |
3/8" |
7/16" |
2,000 lbs. |
| AS-438 |
7/16" |
1/2" |
3,000 lbs. |
| AS-500 |
1/2" |
5/8" |
4,000 lbs. |
| AS-625 |
5/8" |
3/4" |
6,500 lbs. |
| AS-750 |
3/4" |
7/8" |
9,500 lbs. |
| AS-875 |
7/8" |
1" |
13,000 lbs. |
| AS-100 |
1" |
1" - 1/8" |
17,000 lbs. |
|
| quick-links |
| Model No. |
Size |
| 9N |
5/16" |
| 10N |
3/8" |
| 12N |
1/2" |
|
|
|
|
